Multi Card Reader
USB Magnetic Strip – S-MRW12
- Description : USB Magnetic Strip R/W LOCO+HICO Supported
- Model No : S-MRW12
Basic Specification:
| MO | TYPE | SERIES | OPTION | TRACK POSITION | NOTE | INTERFACE |
| GHE | 715 | 1.0A | Mag/passbook R/W | ISO2/ISO3 | 300Oe | RS232/USB |
| GHE | 715H | 1.0A | Mag/passbook R/W | ISO2/ISO3 | 2750Oe | RS232/USB |
| GHE | 714 | 1.0A | Mag/passbook R/W | ISO2/ISO2 | 300Oe | RS232/USB |
| GHE | 714H | 1.0A | Mag/passbook R/W | ISO2/ISO2 | 2750Oe | RS232/USB |
| GHE | 505C,206D | 1.0A | Mag/passbook R/W | ISO1/ISO2/ISO3 | 4000OE | RS232/USB |
Enquiry
Download Datasheet
- Technical Specification
- Character Set Specification
- Card Standards
| Mag Card standard | ISO7811/7812 | ||
| IC Mag Card standard | ISO7816 | ||
| Reading method | F2F(FM) | ||
| Track | Track I | Track II | Track III |
| ISO II ( IATA ) | ISO II ( ABA ) | ISO III ( MINTS ) | |
| Bit per Inch | 210 BPI | 75/210 BPI | 210 BPI |
| Encoding Capacity | 76 byte (7bit) | 37 byte (5bit) | 104 byte (5bit) |
| Card Thickness | PVC : 0.76 ± 0.08mm | ||
| Card Feeding Speed | 10 ~ 150cm/s (R) / 10 ~ 100cm/s (W) | ||
| Passbook Feeding Speed | 10 ~ 150cm/s (R) / 10 ~ 100cm/s (W) | ||
| Lifetime | Reader/Writer ≥800,000 cycles | ||
| Error Rate | Less than 0.5% | ||
| Size | 210mm ( W ) x 70mm ( D ) x 65mm ( H ) | ||
| Weight | Appr.1~1.5kg | ||
| Input Voltage | Lo-Co. (GHE series), DC + 5V ±5%, | ||
| Reading Current | Hi-Co. (GHE series), DC + 24V ±5%,% | ||
| Writing Current | < 100mA | ||
| Storage Temperature | Lo-Co < 100mA | ||
| Operating Temperature | -20°C ~ +55°C | ||
| Storage Humidity | -5°C ~ +50°C 5% ~ 95% RH | ||
| Operating Humidity | 20 %~ 90% RH |
| ASC II | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | : | # | @ | ’ | = | |
| Character Set I | 2 | |||||||||||||||
| HEX | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 23 | 40 | 3D | ||
| 7 | ||||||||||||||||
| ABA Code (Hex) | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | |
| Note:When you write ASCII character=and ‘ ,they will turn to be ABA code D and write to the magnetic stripe. | ||||||||||||||||
| Character Set II | ASC II | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | : | # | @ | ’ | = |
| HEX | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3 | 23 | 40 | 2 | 3D | |
| A | 7 | |||||||||||||||
| ABA Code (Hex) | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | D | |
| So when reading out ABA code D and E from magnetic stripe, it will turn to be ASCII character’ Note:When you write ASCII character=and ‘ ,they will turn to be ABA code D and write to the magnetic stripe. | ||||||||||||||||
| Character Set III | ASCII | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | : | # | @ | ’ | = |
| HEX | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3 | 23 | 40 | 2 | 3D | |
| A | 7 | |||||||||||||||
| ABA Code (Hex) | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | |
| So when reading out ABA code D and E from magnetics tripe, it will turn to be ASCII character=. | ||||||||||||||||
| Character Set VI | ASCII | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | : | ; | < | = | > |
| HEX | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3 | 3B | 3C | 3D | 3E | |
| A | ||||||||||||||||
| ABA Code (Hex) | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | |
- Encoding density:210 BPI (track I/3), 75/210 BPI (track 2)
- Encoding capacity: Track I (Less than 76 byte), Track II (Less than 37 byte), Track III (Less than 104 byte) Data: ISO 1: Less than 76 byte, ISO 2: Less than 37 byte, ISO 3: Less than 104 byte
